Standard Operating Procedure for Double Door Cooling Cabinet Checklist

SOP Number: Hotel Engineering SOP  – 07

Department: Engineering and Maintenance

Date Issued: 16–Feb-2018

Time to Train: 30 Minutes

Double Door Cooling Cabinet Maintenance Checklist and Procedure:

Required Tools:

• Screwdriver.

• Plier.

• Clamp.

• Meter.

• Wire Brush.

• Crimping tool. 

• Greasing Gun.

• Oil Cane. 

• Line Tester.

• Spanner set.

• Soap solution.

Consumable Parts:

• PVC Tape.

• Old clothes.

• Carbon removing Compound.

• Soap solution.

Maintenance Activity:

• Condenser Motor - Check motor bush and shaft.

• Compressor - Check if it is noisy and also the back pressure.

• Check the Electrical controls.

• MCB - Loose & Burnt electrical connection and rating of MCB to be checked.

• Earthing - should be proper.

• Extension cord - burnt, cut in wire to be checked.

• Proper thimbling - burnt connections and thimbles to be checked.

• Relays - operation of relays to check.

• Electrical Loose connection to check.

• Doors/Handles - Check if the handle is loose and also the operation.

• Latch - operation to check.

• Door gaskets - broken gasket and cooling leakage to be checked.

• Cleaning - General cleaning to be done.

• Condenser Fan - Loose & broken fan blade.

• Check Temperature is between 4-6 Deg.C.

• Check if the compressor on full Load should be 5 Amp. 

• Check and verify that the MCB rating should be 20 Amp.

Remarks by the Technician:

Date:

Signature: