How to Clean the Windows in HotelA Hotel or Inn may be defined as an establishment whose primary business is providing lodging facili... GuestDefinition of Guest in Hospitality Industry: A guest is the most important person in any business. A... Rooms?

Cleaning windows is a task that can be quite daunting, especially if you have many windows or if they are located high up in your home or office. However, with the right tools and techniques, you can make this task much easier and more efficient. The first thing you need to do is to gather all the necessary supplies, including a squeegee, a bucket of soapy water, a microfiber cloth, and a scraper for removing stubborn stains. Once you have all the supplies, you can start by removing any dirt or dust from the window using a soft-bristled brush or a microfiber cloth.

Next, use the scraper to clean any stubborn stains or marks on the window. Be careful not to scratch the glass while doing this. Once you have scraped off all the stubborn stains, dip the squeegee into the bucket of soapy water and start cleaning the window. Begin at the top corner of the window and work your way down, making sure to wipe the squeegee blade after each stroke.

After you have cleaned the entire window with the squeegee, use the microfiber cloth to wipe off any remaining water droplets or streaks. If you notice any remaining streaks, you can use a dry microfiber cloth to buff the window until it is completely dry and streak-free. With these simple steps, you can easily clean your windows and enjoy a clear view of the world outside.

1)Collect the equipment needed to clean the windows.

What equipment is needed to clean the guest room windows?

Collect the following items to clean the windows: ladder, bucket of warm water, discard towels, window mop, and window wiper.

Why do you need a ladder?

The ladder is used for high areas that you are unable to reach.

2)Place the discarded towels on the ledge or ground below the window you are about to clean.

Why is it important to place discarded towels on the ground?

Placing discarded towels on the ground catches the water that runs down the glass when wiping it.

3)Wet the window mop inside the bucket.

Wet the window with the window mop in a waving motion, covering all areas of the window glass.

4. Why is it important that the whole area of the glass is wiped?

It is important to wipe the whole area with the window mop to remove any dirt or finger marks.

5)Place the rubber window wiper on the glass and wipe from side to side. Wipe the rubber strip regularly with a discarded towel.

Why is the rubber strip wiped regularly?

The rubber strip is wiped regularly to remove any excess water and dirt that has come from the window.

6)With a discarded towel, wipe the window edges and the ledge at the bottom of the window.

Why must you wipe the window edges?

The window wiper cannot remove the water on the window edges and ledges as it does not reach there, so use a discarded towel to do this.

7)Before moving on to the next window, check your work to make sure the window is clean and make sure you have not left anything behind.

What are common things forgotten while cleaning the window?

Do not forget to check the floor and ledges to ensure all waste has been removed